Lab equipment & QC
DK-58
Each analyser from the equipment register, with calibration and servicing due dates, and the daily quality-control log.
Alerts
No alerts
Nothing is due: every analyser is calibrated, serviced and has today's QC recorded.
Alerts are reported, never enforced. Results are still accepted on Result entry (DK-42); the laboratory head decides what to do.
Analysers
From the equipment register (DK-50)| Code | Name | Make and model | Serial | Kind | Last calibrated | Calibration due | Servicing due | Today's QC |
|---|
No analyser is registered
No analyser is registered. Analysers come
from the equipment register on Buildings & upkeep (DK-50): pick one below.
Register an analyser
As the maker's insert says. Leave blank if it sets none.
New machine, not yet on the register
Administrator only. Adds it to the equipment register (DK-50) as medical equipment in the Laboratory, then registers it here.
Calibration
| Calibrated on | Result | By | Calibrator and lot | Certificate | Next due |
|---|
No calibration on record
No calibration is recorded for this analyser.
The technician, or the service engineer.
Blank: worked out from the analyser's interval.
Today's QC
| Analyte | Level | Lot | Target | Today | Outcome |
|---|
No control material
No control material is set up for this analyser. Add each control
level with its lot, expiry and target mean and SD, or the insert range.
Record a run
Rerun, new control vial, recalibrated, service called.
Add a control material
Levey-Jennings
| Run | Observed | SD from mean | Position, -3 SD to +3 SD | Outcome |
|---|
No runs to plot
No QC run is recorded for this control in the last 30 days.